Zwischenhülse für Steilkegel BT 40 - SK 40 - 100Application: For holding tapers according to DIN 69871, JIS B 6339 and DIN 2080. Delivery: Delivered with a built in screw for shortened taper tools. Additional screw for DIN 2080 tools included. All holders are made of forged steel Specific, low warpage hardened Surface hardened HRC 58~60 Hardening depth 0,8mm~0,9mm Taper angle tolerance < AT 3 according to DIN 2080 Surface roughness Ra < 0,4 m Tensile strength in the core of min. 800 N mm after DIN

- With filter for dirt particle-free cooling

PSK = PSK 50

Especially in operations in toolmaking and mould making

Cone and flange hardened and grinded

- carbide tipped probe Ø 2 mm

For the coolant supply through the centre of HSK toolholders

6 µm radial run-out with a 5 µm clamping nut

Without wrench

- Especially suitable fore wire EDM

The insert is clicked into our grid system with

and vertical

right angularity: 0